Access point – Sony DSC-G3 User Manual
Page 118
Ta
ble
of
Op
e
HO
In
118
GB
Set the access point to use the network function of this camera. The network setting method
differs according to the network environment. An example of settings for a home network is
described here.
1
t
(Communication)
t [Network] t
t [
Network Settings]
t
t
[Access Point]
t
t [Create New] t
[Auto Scan]
t
t select the access point
you want to use
t
The SSID information confirmation screen is displayed.
2 Confirm the SSID is displayed t
If the SSID is not displayed, select [SSID]
t input using the keyboard t
.
3 Select the desired encryption type t
If you have selected [Disable], proceed to Step 5.
4 [Encryption Key] t input the encryption key using the keyboard t
5 [Easy] t
t check your connection name t
t check your
settings on the confirmation screen
t
t [Save] t
t [OK]
• To make detailed settings, select [Custom].
• To change the connection name, touch [Connection Name] and input using the keyboard.
• Certain access points may require your MAC address to be registered onto the access point to connect to
the network. For details, refer to the administrator of your access point.
Access Point
Note
Continued
r