Sony DSC-G3 - Manual (Page 79)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
HO
M
E
/MENU
Se
ar
ch
In
de
x
79 GB
• Scene Recognition does not function in the following situations.
– When shooting in Macro/Close focus enabled mode
– During burst shooting
– When using digital zoom
• The available flash settings are (Flash Auto) and (Flash Off).
• When Face Detection function is set to [When touched], the default setting for Face Detection is set to
[Auto] if Scene Recognition is set to anything other than [Off] before the screen is touched.
• (Twilight using a tripod) scenes sometimes cannot be recognized in an environment where vibrations
are transferred to the camera even though it is fixed on a tripod.
• Sometimes a slow shutter results when a scene is recognized as a ( Twilight using a tripod). Keep the
camera still during shooting.
• The Scene Recognition icon appears regardless of (screen display) settings.
• These scenes may not be recognized depending on the situation.
• The Anti Blink function does not work when Scene Recognition is set to [Auto].
Notes
z What is the Anti Blink function?
When Scene Recognition is set to [Advanced] and the subject closes their eyes while
shooting, this function operates so that the camera automatically records another image
immediately thereafter with the subject’s eyes open. The camera then automatically selects
and displays the image with the subject’s eyes open.
When the Anti Blink function operates but the camera can record only images with the
subject’s eyes closed, the message “Blinked eye detected” appears on the LCD screen.
When Scene Recognition is set to [Auto], the Anti Blink function does not operate, but the
message “Blinked eye detected” still appears on the LCD screen when an image with the
subject’s eyes closed is recorded.