Sony ICD-R100VTP - Manual (Page 172)

A P P E N D I X A Using Dragon NaturallySpeaking With a Portable Recorder
Dragon NaturallySpeaking User’s Guide 166
The following sections describe the options on the Advanced Settings
dialog box:
Destination
You can choose to specify that the recording should be transcribed into
the DragonPad window or into a selected window you click in after
closing the Transcribe Recording dialog box. Make sure the window you
select accepts text.
Commands
You can choose either the All Commands, Restricted Commands, or
Dictation Only option.
■ “All Commands” enables all Dragon NaturallySpeaking commands
during transcription. Any command recognized in the recording is
carried out.
■ “Restricted Commands” disables all but the restricted command set
during transcription. If other commands are recognized, they are
entered as text. This prevents potentially damaging misrecognitions
(for example, a phrase being misrecognized as “Delete Previous
Paragraph”). For more information about the restricted command
set, see page 159.
■ “Dictation Only” disables all commands during transcription,
except for dictation commands. If the recording contains commands,
they are entered as text in the document.
Communication Options (for the Dragon NaturallyMobile recorder only)
■ “Select the Baud Rate to connect to the Dragon NaturallyMobile
recorder” specifies the communication speed between your
computer and your recorder. Generally, the speed should be set to
the highest number (115,200). If you are having communication
errors, try selecting a lower number.
■ “Dragon NaturallyMobile recorder is on <Com Port Number>”
specifies the serial communications (COM) port that corresponds to
the connector where you plugged in your recorder. If you have a
problem connecting with your recorder, try selecting a different
COM port. The default COM port is COM1.
UG5.bk Page 166 Friday, August 4, 2000 2:26 PM