Sony DCR-TRV20 - Manual (Page 133)

133
Additional Information
Symptom Cause and/or Corrective Actions
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least one hour to acclimatize. (p. 138)
• Some troubles has occurred in your camcorder.
c Remove the cassette and insert it again, then operate
your camcorder.
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 14)
• The battery pack is not properly installed.
c Install it properly.
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony
service facility.
• Disconnect the power cord of the AC power adaptor or
remove the battery, then reconnect it in about one minute.
Turn the power on. If the functions still do not work, open
the LCD panel and press the RESET button beside the
SELFTIMER button using a sharp-pointed object. (If you
press the RESET button, all the settings including the date
and time return to the default.) (p. 146)
• Your camcorder is not a malfunction.
The melody or beep sounds for five
seconds.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
No function works though the
power is on.
When you set the POWER switch to
VCR or OFF (CHG), if you move
your camcorder, you may hear a
clatter sound from inside your
camcorder.
Troubleshooting