Sony DCR-TRV20 - Manual (Page 59)

59
Editing
Dubbing only desired scenes – Digital program editing
Setting the modes to cancel the recording pause on the VCR
(1) Turn the SEL/PUSH EXEC dial to select PAUSEMODE, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select the mode to cancel recording pause
on the VCR, then press the dial.
The correct button depends on your VCR.
Refer to the operating instructions of your VCR.
The buttons to cancel recording pause on the VCR
The buttons vary depending on your VCR. To cancel recording pause:
• Select playback pause if the button to cancel recording pause is X.
• Select recording if the button to cancel recording pause is z.
• Select playback if the button to cancel recording pause is N.
Setting your camcorder and the VCR to face each other
Locate the infrared ray emitter of your camcorder and face it towards the remote sensor
of the VCR.
Set the devices about 11 7/8 in. (30 cm) apart, and remove any obstacles between the
devices.
1 2
ED I TSET
CONTROL
ADJ TEST
CUT - I N
CUT -OUT
I R SETUP
PAUSEMODE
I R TEST
RETURN
[MENU] : END
PAUSE
REC
PB
OTHERS
ED I TSET
CONTROL
ADJ TEST
CUT - I N
CUT -OUT
I R SETUP
PAUSEMODE
I R TEST
RETURN
[MENU] : END
PAUSE
OTHERS
VCR
Remote sensor