Sony DCR-TRV20 - Manual (Page 26)

26
Using the data code function
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Press DATA CODE on your camcorder or the Remote Commander in the playback
mode.
The display changes as follows:
date/time
t various settings (SteadyShot, white balance, gain, shutter speed, aperture
value, exposure mode) t no indicator
Not to display various settings
Set DATA CODE to DATE in the menu settings (p. 85).
The display changes as follows:
date/time
y no indicator
Recording data
Recording data is your camcorder’s information when you have recorded. In the
recording mode, the recording data will not be displayed.
When you use the data code function, bars (-- -- --) appear if:
•A blank portion of the tape is being played back.
•The tape is unreadable due to tape damage or noise.
•The tape was recorded by a camcorder without the date and time set.
Data code
The data code is displayed on the TV screen if you connect your camcorder to the TV
(p. 28).
To display the screen indicators – Display function
Press DISPLAY on your camcorder or the Remote Commander supplied with your
camcorder.
The indicators appear on the LCD screen.
To make the indicators disappear, press DISPLAY again.
Playing back a tape
DATA CODE
DISPLAY
Date/time Various settings
Aperture value
SteadyShot OFF indicator
White balance indicator
Gain indicator
Shutter speed indicator
Exposure mode indicator
60 AWB
F1.8 9dB
AUTO
JUL 4 2000
12:05:56 AM