148 th tj tk tl y; tg tf td ts – Sony DCR-TRV20 User Manual
Page 148
148
th
tj
tk
tl
y;
tg
tf
td
ts
ts
AUDIO/VIDEO jack (p. 28, 54, 67)
td i
(headphones) jack
When you use headphones, the speaker
on your camcorder is silent.
tf
OPEN/EJECT lever (p. 15)
tg
Tripod receptacle
Make sure that the length of the tripod
screw is less than 9/32 inch (6.5 mm).
Otherwise, you cannot attach the tripod
securely and the screw may damage
your camcorder.
th
DV IN/OUT jack (p. 55, 66, 69)
This “i.LINK” mark is a trademark of
Sony Corporation and indicates that this
product is in agreement with IEEE 1394-
1995 specifications and their revisions.
The DV IN/OUT jack is i.LINK compatible.
tj
DC IN jack (p. 11)
tk
DIGITAL I/O (LANC) control jack
(DCR-TRV11/TRV20 only)
(LANC) control jack(DCR-TRV6 only)
LANC stands for Local Application
Control Bus System. The control jack
is used for controlling the tape transport
of video equipment and other
peripherals connected to the video
equipment. This jack has the same
function as the jack indicated as
CONTROL L or REMOTE.
tl
MIC jack (PLUG IN POWER)
Connect an external microphone
(not supplied). This jack also accepts
a “plug-in-power” microphone.
y;
S VIDEO jack (p. 28, 54, 67)
Note on the Carl Zeiss lens
Your camcorder is equipped with a Carl Zeiss lens which can reproduce a fine
image.
The lens for your camcorder was developed jointly by Carl Zeiss, in Germany, and
Sony Corporation. It adopts the MTF* measurement system for video camera and
offers a quality as the Carl Zeiss lens.
* MTF is an abbreviation of Modulation Transfer Function/Factor.
The value number indicates the amount of light of a subject penetrating into the
lens.
Identifying the parts and controls