Sony DCR-TRV20 - Manual (Page 56)

56
Dubbing only desired scenes – Digital
program editing
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame.
Before operating the digital program editing
Step 1 Connecting the VCR. (p. 54, 55)
Step 2 Setting the VCR for operation. (p. 57,60)
Step 3 Adjusting the synchronicity of the VCR. (p. 62)
When you dub using the same VCR again, you can skip steps 2 and 3.
Using the digital program editing function
Operation 1 Making the program. (p. 64)
Operation 2 Performing a digital program editing (dubbing a tape). (p. 65)
Step 1: Connecting the VCR
Connect your camcorder and the VCR as shown on pages 54, 55.
You can connect both an AV cable and an i.LINK cable (DV connecting cable).
Unwanted scene Unwanted scene
Switch the order