Sony DCR-TRV20 - Manual (Page 83)

83
Editing
Labeling a cassette
If you use a tape with cassette memory, you can label a cassette. The label can
consist of up to 10 characters and is stored in cassette memory. When you insert
the labelled cassette and turn the power on, the label is displayed for about five
seconds.
(1) Insert the cassette you want to label.
(2) Set the POWER switch to VCR.
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select TAPE TITLE, then press the dial. Tape
title display appears.
(6) Turn the SEL/PUSH EXEC dial to select the column of the desired character,
then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
(8) Repeat steps 6 and 7 until you finish the label.
(9) Turn the SEL/PUSH EXEC dial to select [SET], then press the dial.
The label is stored in memory.
4,5
CM SET
CM SEARCH
T I TLEERASE
T I TLE DSPL
TAPE T I TLE
ERASE ALL
[MENU] : END
6-8
TAPE T I TLE
[MENU] : END
TAPE T I TLE
[MENU] : END
TAPE T I TLE
M
[MENU] : END
TAPE T I TLE
[MENU] : END
CM SET
CM SEARCH
T I TLEERASE
T I TLE DSPL
TAPE T I TLE
ERASE ALL
[MENU] : END
TAPE T I TLE
[MENU] : END