AT&T E5908 - Manual (Page 11)

7
Getting Started
Battery installation & charging
After battery installation, place the cordless handset in the charger and allow to charge
for at least 16 hours before use. You can keep the battery charged by returning the
cordless handset to the charger after each use. When the battery is fully depleted, a
recharge takes about 12 hours. The average talk time on a fully charged battery is about
five hours depending on environmental conditions, and the standby time is approximately
five days.
Plug in connector
plug here.
Low battery indicator
Return handset to charger when this
symbol appears.
NEEDS RECHARGING
0 8/12 10:06 AM
Place handset in charger for at
least 16 hours before first use.
Plug power adapter into jack on
underside of charger as shown,
then plug into an electrical outlet
not controlled by a wall switch.
Place the battery pack and
wires in the compartment.
Caution: Use only the supplied rechargeable battery pack or AT&T replacement battery model 3301 (SKU 91076.
Part number 80-5071-00-00).
LOW BATTERY
0 8/12 10:06 AM
then
NOTE: If you need a battery pack replacement, call 1-800-222-3111. In Canada, call 1-866-288-4268.
91-000646-010-000_E5908_R11.qxd 10/01/2006 6:09 PM Page 7