AT&T E5908 - Manual (Page 13)

9
Getting Started
Belt clip & optional headset
Install belt clip as shown below if desired.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap).
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm headset.
91-000646-010-000_E5908_R11.qxd 10/01/2006 6:09 PM Page 9