AT&T E5908 - Manual (Page 41)

37
Answering System Operation
1. SETUP
3. SETUP
Or
Press until desired feature
is heard (see list at right).
Press until desired selection
is heard.
Press to set selection and
move to next menu option.
Press to set selection and
exit menu.
2. SKIP or REPEAT
(Play/Stop)
Changing feature options
Menu features can be changed to program how the
answering system operates. Press
SETUP
repeatedly to
hear each feature. When you hear the feature you want
to modify press
SKIP
or
REPEAT
to change the setting.
Feature options (Default settings underlined).
System announces: Feature description:
"Number of rings" , current set-
ting, then "To change the set-
ting press SKIP or REPEAT; to
continue setup, press SETUP"
Options: 2 / 4 / 6 /Toll Saver
"Call screening" , current set-
ting, then "To change the set-
ting press SKIP or REPEAT; to
continue setup, press SETUP"
Options: On / Off
"Remote access code", current
setting, then "To change the
setting press SKIP or
REPEAT; to continue setup,
press SETUP"
Options: (enter 2-digit code) 19
"Message alert tone" , current
setting, then "To change the
setting press SKIP or
REPEAT; to continue setup,
press SETUP"
Options: On / Off
Choose number of rings before the sys-
tem answers a call. When Toll Saver is
active, the system answers after 2 rings if
you have new messages, and after 4
rings if you have no new messages.
When retrieving messages from a long-
distant call, you may disconnect your call
after 3 rings so that long-distance
charges will not be charged.
When on, you can hear callers leave mes-
sages, or answer the call.
Enter a two-digit number (10-99) for
remote access from another phone (see
page 41).
When on, the telephone beeps every 10
seconds when you have new messages.
NOTE: Press and hold SKIP or REPEAT to increase or decrease
the remote access code number by 10.
16
91-000646-010-000_E5908_R11.qxd 10/01/2006 6:10 PM Page 37