AT&T E5908 - Manual (Page 15)

11
Telephone Operation
Handset settings
Set handset date and time
The handset displays the date and time when you are
not using it. You can set the time manually, or you can
allow it to be set automatically with incoming Caller ID
information. The time will be set automatically only if
you subscribe to Caller ID service provided by your
local telephone company (see page 5).
• Press
MENU/CHAN
to begin programming.
• Press
CID
V twice. The screen shows DATE/TIME .
Press
SELECT
to confirm.
• The month in the displayed date starts to flash. Use
CID
V and
DIR
^ to scroll through the numbers
1, (for January,) -12, (for December.) Press
SELECT
when the appropriate month is flashing.
• The date starts to flash. Use
CID
V and
DIR
^ to
scroll through the numbers 1-31. Press
SELECT
when the appropriate date is flashing.
• The hour starts to flash. Use
CID
V and
DIR
^ to
scroll through the numbers 1-12. Press
SELECT
when the appropriate hour is flashing.
• The minute starts to flash. Use
CID
V and
DIR
^
to scroll through the numbers 00-59. Press
SELECT
when the appropriate minute is flashing.
• The AM/PM starts to flash. Use
CID
V and
DIR
^
to toggle between AM and PM. Press
SELECT
when
the appropriate option is flashing, save the selection,
and exit.
NOTE: You can choose to set the time manually, or you can allow it to
be set automatically with incoming Caller ID information. The time will be set
automatically only if you subscribe to Caller ID service provided by your local
telephone company.
DATE/TIME
1/01 12:00 AM
91-000646-010-000_E5908_R11.qxd 10/01/2006 6:09 PM Page 11