To remove a memory module – Sony PCG-SR33 User Manual
Page 75
Advertising
To Remove a Memory Module
75
8
Close the display panel and replace the six (6) screws on the bottom of the
notebook.
9
Use the Phillips (+) screwdriver to tighten all six screws at the locations
shown below.
To Remove a Memory Module
1
Perform steps 1 through 3 of “To Install a Memory Module” .
2
Touch a metal object (such as the connector panel on the back of your
notebook) to discharge static electricity.
Aligning the Palm Rest
Notch on Keyboard
Advertising