Sony PMC-MD55 - Manual (Page 21)

The CD Player•The MD Player
21
The CD Player•The MD Player
Tips
• If the program play is
finished, the program
is saved. You can play
the same program
again by pressing
^.
• The program is erased:
– if you open the lid of
the CD compartment
or
– if you take out the
MD.
• During play, total
programed time cannot
be displayed.
To cancel Programme Play
Stop play first. Then, press SHUF/PGM until “PGM”
disappears from the display.
To check the order of tracks before play
Before starting the program play, press YES•ENTER.
“PGM Check” appears in the display. Every time you
press YES•ENTER, the track number appears in the
programed order.
To change the current program
Change before starting the program play.
To Do this
erase the last track in 1 Press NO•CANCEL.
the program The track programed last is
erased.
2 Re-enter the track numbers by
turning the jog dial and pressing
YES•ENTER.
change the whole 1 Press p to erase the whole
program completely program.
2 Create a new program
following the programing
procedure.