Sony PMC-MD55 - Manual (Page 69)

69
Additional Information
Troubleshooting
Remedy
• Press POWER to turn on the player.
• Connect the AC power cord to a wall outlet
securely.
• Connect the power cord to POWER INPUT of
the player (page 54).
• Connect the audio connecting cord correctly
(page 54).
• Adjust the volume.
• Unplug the headphones from the
2 jack when
listening through speakers.
• Wait until “TOC Reading” disappears from the
display.
• Move the player away from the TV.
• Someone is using a portable telephone or other
equipment that emits radio waves near the
player. n Move the portable telephone, etc.,
away from the player.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the player in a location free from
vibration.
• The MD player’s self-lock system has gripped
the MD. Insert the MD completely, then press
6 MD EJECT.
• Take the MD out and insert it again. If "Disc
Error" remains, replace the MD. Try erasing all
tracks on the MD (page 35).
CD Player
General
MD Player
Symptom
There is no audio.
The picture of your TV becomes
unstable.
Noise is heard
The CD does not play./“No Disc“
lights in the display even when a
CD is in place.
The sound drops out.
An incompletely inserted MD
cannot be pulled out.
"Disc Error" lights in the display
and the player does not operate.
continued