Normal speaker and micro satellite speaker, Specifying the speaker parameters – Sony HT-6600DP User Manual

Page 17

Advertising
background image

Hooking Up and Setting Up the Speaker System

17

US

HT-6600DP 4-244-560-11(1) US

45

°

90

°

20

°

B

C

C

A

A

continued

When placing surround speakers behind you

(wide room)

Note

Do not place the center speaker further away from the
listening position than the front speakers.

Normal Speaker and Micro
Satellite Speaker

For HT-6600DP, the speaker size and the sub
woofer selection has been preset to “MICRO
SP.” (Micro Satellite Speaker) according to the
supplied speaker system.

When you select “MICRO SP.”, the speaker
size and sub woofer selection has been
configurated as follows:

Speaker

Settings

FRONT

SMALL

CENTER

SMALL

SURROUND

SMALL

SUB WOOFER

YES

You cannot change the configuration if you
select “MICRO SP.”.

If you change the speaker system, select
“NORM. SP.”. You can adjust the speaker size
and sub woofer selection when you select
“NORM. SP.” (page 19).

To select “NORM. SP.”, turn off the power,
then turn on again while pressing MAIN
MENU. (To reset to “MICRO SP.”, do the
same procedure.)

Tip

The setting for Micro Satellite Speaker (MICRO SP.)
has been programmed to optimize the sound balance.
If you use Sony’s Micro Satellite Speakers, select
“MICRO SP.”.

Caution

When you use Micro Satellite Speakers and the
speaker size is set to “LARGE”, you may not obtain
the correct soundstage. The speaker may also be
damaged at high volume position.

Specifying the speaker
parameters

1

Press MAIN MENU repeatedly to select

SET UP

”.

2

Press

or

to select the parameter

you want to adjust.

3

Turn the jog dial to select the setting
you want.

The setting is entered automatically.

4

Repeat steps 2 and 3 until you have set
all of the parameters that follow.

Initial settings

Parameter

Initial setting

L

R

DIST. XX ft.

10 ft.

C

DIST. XX ft.

10 ft.

SL

SR

DIST. XX ft.

10 ft.

SL

SR

PL. XXXX

LOW

Sub woofer

Advertising