Changing the display – Sony HT-6600DP User Manual

Page 23

Advertising
background image

Basic Operations

23

US

HT-6600DP 4-244-560-11(1) US

PHONES

Use to connect headphones.

• When the headphones are connected, speaker

output is automatically canceled and “SP A”
and “SP B” do not light up in the display.

SPEAKERS (OFF/A/B/A+B)

Press SPEAKERS (OFF/A/B/A+B) to output
the sound from the speakers connected to the
SPEAKERS FRONT terminals.

Each time you press the button, the display will
light up cyclically as follows:

SP A

t SP B t SP A and SP B t

No display*

To drive

Select

Speaker System A

SP A (default setting)

(Connected to the
SPEAKERS FRONT A
terminals)

Speaker System B

SP B

(Connected to the
SPEAKERS FRONT B
terminals)

Both Speaker System A

SP A and SP B

and B (Connected to the
SPEAKERS FRONT A
and B terminals)

* If you do not want to drive Speaker System A

and B, press SPEAKERS (OFF/A/B/A+B) until
“SP A” and “SP B” do not light up in the display
(no display).

Changing the display

DIMMER

Press DIMMER repeatedly to adjust the
brightness of the display (3 steps).
However, when you press any button, the
display becomes the brightest setting
temporary.

DISPLAY

Each time you press DISPLAY, the display
changes cyclically as follows:

Index name of the component*

t Selected

component

t Sound field applied to the

program source

When the tuner is selected

Index name of the preset station*

t

Frequency

t Sound field applied to the band

or the preset station

* Index name appears only when you have assigned

one to the component or preset station (page 33).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input selector.

Advertising