Other operations, Naming preset stations and program, Sources – Sony HT-6600DP User Manual

Page 33: Recording, Naming preset stations and program sources

Advertising
background image

Other Operations

33

US

HT-6600DP 4-244-560-11(1) US

Other Operations

4

Press ENTER.

5

Repeat steps 2 to 4 to assign index
name for another station or program
source.

Recording

Before you begin, make sure you’ve connected
all components properly.

Recording on an audio tape
or MiniDisc

You can record on a cassette tape or MiniDisc
using the receiver. See the operating
instructions of your cassette deck or MD deck
if you need help.

1

Select the component to be recorded.

2

Prepare the component for playing.

For example, insert a CD into the CD
player.

3

Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.

4

Start recording on the recording deck,
then start playback on the playback
component.

Naming preset stations
and program sources

You can enter a name (index name) of up to 8
characters for preset stations and program
sources. These names (for example, “VHS”)
appear in the receiver’s display when a station
or program source is selected. Note that no
more than one name can be entered for each
preset station or program source.
This function is useful for distinguishing
components of the same kind. For example,
two VCRs can be specified as “VHS” and
“8MM”, respectively. It is also handy for
identifying components connected to jacks
meant for another type of component, for
example, a second CD player connected to the
MD/TAPE jacks.

1

To name a preset station

Press TUNER FM/AM, then tune in the
preset station you want to create an
index name for.

If you are not familiar with how to tune in
preset stations, see “Tuning to preset
stations” on page 32.

To name a program source

Select the program source (component)
to be named.

2

Press MAIN MENU repeatedly to select

NAME

”.

3

Create an index name by using the jog
dial and

or

:

Turn the jog dial to select a character, then
press

to move the cursor to the next

position.

To insert a space

Turn the jog dial until a blank space appears
in the display.

If you’ve made a mistake

Press

or

repeatedly until the character

to be changed flashes, then turn the jog dial
to select the character you want.

continued

Advertising