Sony RM-NX7000 - Manual (Page 12)

Importing the settings saved on a Memory Stick to NAVITUS Design
You can import the settings saved on a Memory Stick to NAVITUS Design. The setting data you can import is as follow s:
 Full data s e t
 Includes all the Remote Commander settings.
 See " Importing all the Remote Commander settings ."
 Com pone nt data
 Includes the settings of a specific component.
 See " Adding the settings of a specific component to a current project ."
 Pre s e t table
 Includes the preset code list (preset table).
 See " Importing the preset code list to NAVITUS Design ."
Note s
 A single Memory Stick can contain only one of the above.
 Do not remove the Memory Stick from the Memory Stick slot w hile importing data. Doing so may cause a malfunction.
Importing all the Remote Commander settings (Full data set)
1. Ins e rt the M e m ory Stick that contains the Full data s e t into an available M e m ory Stick s lot of your PC.
2. Click "File " of the m e nu bar and point to "M e m ory Stick ," the n s e le ct "Im port from M e m ory Stick ."
All the Memory Stick slots that are available on your PC are searched. When the Memory Stick that contains the Remote Commander settings is found,
the "Import from Memory Stick" dialog box appears.
The "Import from Memory Stick" dialog box displays the setting data type (Full data set) and the last date of setting data.
Hint
If several Memory Sticks containing the setting data are found, a dialog box appears to select a Memory Stick before the above dialog box appears. In
this dialog box, select the Memory Stick from w hich you w ant to import the data, then click "OK" to display the "Import from Memory Stick" dialog box.
3. Confirm the type (Full data s e t) and the las t date of data s e tting, the n click "Im port."
Importing of the data settings saved on the Memory Stick starts. When importing is complete, the "Save as" dialog box appears, w hich allow s you to
save the settings from the Memory Stick as a
project .
Hint
If the project you are editing is not saved, a dialog box appears to confirm the saving before importing of the setting data starts. To save the project,
click "Save." If you do not w ant to save the project, click "Don't save."
4. Ente r a proje ct folde r nam e on the right s ide of in "Input a proje ct folde r nam e ."
5. Click .
A dialog box appears to select a folder.
6. Se le ct the folde r in w hich you w ant to s ave the proje ct, the n click "OK."
The display returns to the "Save as" dialog box, and the selected folder is displayed on the left side of .
7. Click "OK."
The "Save as" dialog box closes, and the imported settings are saved under the project name entered in step 4. They are also displayed on NAVITUS
Design.
Adding the settings of a specific component to a current project (Component data)
1. Ope n the proje ct in w hich you w ant to add the com pone nt s e ttings .
2. Ins e rt the M e m ory Stick that contains the Com pone nt data into an available M e m ory Stick s lot of your PC.
3. Click "File " of the m e nu bar and point to "M e m ory Stick ," the n s e le ct "Im port from M e m ory Stick ."
All the Memory Stick slots that are available on your PC are searched. When the Memory Stick that contains the Remote Commander settings is found,
the "Import from Memory Stick" dialog box appears.
The "Import from Memory Stick" dialog box displays the setting data type (Component data) and the last date of setting data.
Hint
If several Memory Sticks containing the setting data are found, a dialog box appears to select a Memory Stick before the above dialog box appears. In
this dialog box, select the Memory Stick from w hich you w ant to import the data, then click "OK" to display the "Import from Memory Stick" dialog box.
4. Confirm the type (Com pone nt data) and the las t date of data s e tting, the n click "Im port."
Importing of the setting data saved on the Memory Stick starts. When importing is complete, the imported settings are added to the displayed project.
Importing the preset code list to NAVITUS Design (Preset table)
1. Clos e any curre ntly ope n proje ct file s on NAVITUS De s ign.
2. Ins e rt the M e m ory Stick that contains the Pre s e t table into an available M e m ory Stick s lot of your PC.
Page 12