Sony STR-DA1500ES - Manual (Page 46)

46 US
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U
VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm masterpage: Left
STR-DA1500ES
4-129-743-11(1)
1
Press DMPORT.
You can also use the INPUT SELECTOR
on the receiver to select “DMPORT”.
2
Start playback of the connected
component.
The sound is played back on the receiver
and the image appears on the TV.
For details, refer to the operating
instructions supplied with the DIGITAL
MEDIA PORT adapter.
Notes
• Depending on the type of DIGITAL MEDIA
PORT adapter, you can operate the connected
component by using the remote. For details on the
remote button operation, see page 9.
• Be sure you have connected the MONITOR OUT
of the receiver to the TV (page 45).
Changing the display
You can check the volume level, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows.
All inputs except the FM and AM
band, XM Radio and SIRIUS
Satellite Radio
Index name of the input* t Selected input t
Volume level
FM and AM band
Preset station name* t Frequency t
Volume level
XM Radio and SIRIUS Satellite
Radio
Channel name t Channel number t
Category name t Artist name/Feature t
Song/program title t Composer name
(SIRIUS only) t Signal strength t Volume
level
* Index name appears only when you have assigned
one to the input or preset station (page 23, 32).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Note
Character or marks may not be displayed for some
languages.
Listening/watching a connected
component through DMPORT
connection