Sony STR-DA1500ES - Manual (Page 56)

56 US
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U
VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm masterpage: Left
STR-DA1500ES
4-129-743-11(1)
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code UC only)
With 8 ohms loads, both channels driven, from
20 – 20,000 Hz; rated 95 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Models of area code UC
1)
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
95 W + 95 W
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 0.7%)
105 W + 105 W
1)
Measured under the following conditions:
Frequency response
PHONO RIAA equalization curve
±0.5 dB
Analog 10 Hz – 70 kHz
+0.5/–2 dB (Bass: 0 dB,
Treble: 0 dB)
Inputs
PHONO Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N 2) : 90 dB
(A, 20 kHz LPF) 3)
Analog Sensitivity: 150 mV/
50 kohms
S/N
2)
: 96 dB
(A, 150 mV
3)
)
Outputs (Analog)
AUDIO OUT Voltage: 150 mV/10
kohms
Equalizer
Gain levels ±10 dB, 1 dB step
2) INPUT SHORT (Bass: 0 dB, Treble: 0 dB).
3) Weighted network.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna (aerial) Loop antenna (aerial)
Intermediate frequency
450 kHz
Video section
Inputs/Outputs
Video: 1 Vp-p/75 ohms
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT: 5 V, 0.7 A MAX
Power consumption
Power consumption (during standby mode)
0.3 W (when “RS232C” is
set to “OFF”)
Area code Power requirements
UC 120 V AC, 60 Hz
Area code Tuning scale
10 kHz step 9 kHz step
UC 530 –
1,710 kHz
531 –
1,710 kHz
Area code Power requirements
UC 120 V AC, 60 Hz
Area code Power consumption
UC 210 W