Using the sleep timer, Recording using the receiver, Using the sleep timer recording using the receiver – Sony STR-DA1500ES User Manual

Page 47

Advertising
background image

47

US

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U
VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm

masterpage: Right

STR-DA1500ES
4-129-743-11(1)

Oth

e

r Op

eratio

ns

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.

Press SLEEP repeatedly while the
power is on.

Each time you press the button, the display
changes cyclically as follows:

0-30-00

t

1-00-00

t 1-30-00 t 2-00-00

t OFF

When sleep timer is being used, “SLEEP”
lights up in the display.

Tip

To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.

Recording using the
receiver

You can record from an audio/video
component using the receiver. Refer to the
operating instructions supplied with your
recording component.

You can record onto a MiniDisc or audio tape
using the receiver. Refer to the operating
instructions supplied with your MD deck or
tape deck.

1

Press one of the input buttons
to select the playback
component.

You can also use INPUT SELECTOR on
the receiver.

2

Prepare the playback
component for playing.

For example, insert a CD into the CD
player.

3

Prepare the recording
component.

Insert a blank MD or tape into the
recording deck and adjust the recording
level.

4

Start recording on the
recording component, then
start playback on the playback
component.

Note

Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.

Recording onto a MiniDisc or
audio tape

Advertising