Sony PCV-LX800 - Manual (Page 49)

Removing, Installing, and Replacing Components 35
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
1 Remove the system cover (see “Removing the System Cover” on
page 22 ).
2
Locate the memory module you wish to remove.
3
Push out the handle on each side of the memory module to eject the
module from its socket.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
✍
If the memory module you wish to remove is DIMM #2, skip steps 3 to 5. Otherwise,
continue.
KY0073.VSD
DIMM 1
DIMM 2
(empty)
Handles
Push out
KY0042.VSD