Sony PCV-LX800 - Manual (Page 52)

VAIO Slimtop™ Reference Manual 38
4 Unplug the ribbon cable and power supply cable (see 1 in diagram)
from the hard drive.
5
Remove the four pins (see 2 in diagram) from the hard drive.
6
Insert the four pins in the new hard drive in the same position as they
were in the old hard drive.
7
Set the jumpers on the new hard drive to be the Primary Master IDE
drive (refer to the instructions that came with your new hard drive).
8 Rest the hard drive upside down on a flat surface, with the
connectors facing left.
9
Reconnect the ribbon cable and power supply cable to the new hard
drive.
MER005.VSD
1
2
2