Dimm configurations, L2 cache, Graphics – Sony PCV-LX800 User Manual

Page 102: Dimm configurations l2 cache graphics

Advertising
background image

VAIO Slimtop™ Reference Manual

88

DIMM Configurations

L2 Cache

Graphics

DIMM1

*

* The PCV-LX700 is shipped with 64 MB. The PCV-LX800 is shipped with 128 MB. SDRAM is expandable to

512 MB. Computer SDRAM is unbuffered DIMM, specification Rev. 1.0 or later. Supports SDRAM memory.
Does not support EDO memory or buffered DIMM memory. Memory can be installed in either socket.
Memory size can vary between sockets. DIMMs can be single- or double-sided. DIMMs must be 3.3V
unbuffered 4-clock, 64-bit or 72-bit, 133 MHz SDRAM module. Use only 133 MHz memory. Do not mix 100
MHz memory with 133 MHz memory.

DIMM2

*

0, 16, 32, 64, 128, 256

0, 16, 32, 64, 128, 256

Installed

256 kbytes secondary write-back cache (in processor),
direct-mapped organization, on-chip cache

Controller

SiS630 host bridge controller

Controller

*

* Supports DDC-1 and DDC-2b standards for Plug and Play displays.

SiS630 graphics hardware acceleration

Video memory

PCV-LX700: 8 Mbytes (uses system memory)
PCV-LX800: 16 Mbytes (uses system memory)

Resolution (displayed resolution depends on the graphics display you use)

True color (32 bits) Up to 1600 x 1280 at 85 Hz non-interlaced

High color (16 bits) Up to 2048 x 1536 at 70 Hz non-interlaced

256 colors (8 bits)

Up to 2048 x 1536 at 70 Hz non-interlaced

Advertising
This manual is related to the following products: