Sony VGN-FW170J - Manual (Page 140)

140 n N
Troubleshooting
Why can't I use the built-in MOTION EYE camera?
❑
The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.
❑
If the problem persists, you must reinstall the driver software for the camera. Follow these steps:
1 Click Start , Control Panel , Hardware and Sound , and Device Manager .
2 Double-click Imaging devices .
3 Right-click the device name for your camera and click Update Driver Software .
What should I do if my computer becomes unstable when it enters a power saving mode
while the built-in MOTION EYE camera is in use?
❑
Do not place your computer into Sleep or Hibernate mode while you are using the built-in MOTION EYE camera.
❑
If your computer automatically enters Sleep or Hibernate mode, change the corresponding power saving mode setting.
For changing the setting, see
Using the Power Saving Modes (page 101) .