Sony XAV-602BT - Manual (Page 159)

Battery charge capability
*1 The USB rear cable labeled “HIGH CHARGE” is recommended to use for recharging the battery of a connected
device.
*2 If the device connected to the USB rear cable labeled “HIGH CHARGE” is not recharged, set [USB Battery Charge
Mode] to [Standard] (page 27).
*3 Depending on the connected device and/or the selected USB port on the unit, the unit may not be able to
provide enough power to recharge the battery.
*4 An iPod is charged when it is connected to the unit via the appropriate adaptor. In this case, USB connection is
also required.
USB MHL (XAV-712HD only) HDMI (XAV-712HD only)
*
1 * 2 * 3

-* 4