Sony XAV-602BT - Manual (Page 6)

6
GB
 Disc slot
(XAV-712HD: located behind the front panel)
 VOLUME –/+
 DSPL (display)
Change the display items.
-M.OFF (monitor off)
Press and hold to turn off the monitor and the
button illumination. Touch anywhere on the
display to turn back on.
 Reset button
(XAV-602BT: located behind the front panel)
 Display/touch panel
 Receptor for the remote commander
 HOME
Open the HOME menu.
-VOICE
Press and hold for more than 2 seconds to
activate the voice command function. When the
App Remote function is on, voice recognition
(Android phone only) and voice dial is activated.
When the App Remote function is off, only voice
dial is available.
-ATT (attenuate) (XAV-712HD only)
Press and hold for more than 2 seconds to
attenuate the sound. To assign the ATT function
to the HOME button, select [ATT ON/OFF] in
[HOME Key Function (hold 2sec push)] (page 25).
 SOURCE
Turn on the power.
Change the source. Each press displays a
selectable source in a popup on the current
display.
-OFF
Press and hold for 1 second to exit the source.
Press and hold for more than 2 seconds to turn
off the unit. When the unit is turned off, remote
commander operation is not available.
Volume control dial (XAV-602BT only)
Rotate to adjust the volume.
  (disc eject)
-TILT (XAV-712HD only)
Press and hold to adjust the monitor angle.
 USB port (XAV-602BT only)
Open the cover to connect a USB device.
 Front panel release button (XAV-602BT only)
The remote commander can be used to operate the
audio controls. For menu operations, use the touch
panel.
Remove the insulation film before use.
 POSITION
Switch the listening position.
  (return)
Return to the previous display/return to the
menu on a Video CD (VCD).
 EQ (equalizer)
Select an equalizer curve.
 Number buttons (0 - 9)
 CLEAR
 Z×Z (Zone × Zone) (page 23)
  (play/pause)
/ (previous/next)
 DVD playback setting buttons
 ZAP (zappin) (page 16)
 /// (cursor)/ENTER
 MODE
Select the radio band/auxiliary device.
RM-X271 remote commander