Sony HT-DDW700 - Manual (Page 11)

11 US
F:\Sony SEM
HA\Revision2_DDW700\J906XXXX_26614591212DDW700_US\2661459122\030CON_HT-
DDW700_UCA.fm masterpage: Right
HT-DDW700
2-661-459-12 (2)
Getting Star
ted
* The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
S DISPLAY Press to select the information
displayed on the TV screen of
the VCR, satellite tuner, CD
player or DVD player.
T -/-- Press -/-- and TV (P) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
x
Press to select track numbers
over 10 of the VCR, satellite
tuner or CD player or to select
channel numbers of the
Digital CATV terminal.
CLEAR Press to clear a mistake when
you press the incorrect
numeric buttons or to return to
continuous playback, etc. of
the satellite tuner or DVD
player.
U Numeric
buttons
(number 5*)
Press to preset/tune to preset
stations or to select track
numbers of the CD player or
DVD player or to select
channel numbers of the VCR
or satellite tuner. Press 0/10 to
select track number 10. Press
the numeric buttons and TV
(P) at the same time to select
the TV channels.
V 2CH Press to select 2CH STEREO
mode.
W A.F.D. Press to select A.F.D. mode.
X AUTO CAL Press to activate the Auto
Calibration function.
Y TV/VIDEO Press TV/VIDEO and TV
(P) at the same time to select
the input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
Name Function
010COV_HT-DDW700_UCA.book Page 11 Friday, January 13, 2006 3:36 PM