Resetting sound fields to the initial settings, Using only the front speakers and, Sub woofer (2ch stereo) – Sony HT-DDW700 User Manual
Page 42: Resetting sound fields to the initial, Settings, Using only the front speakers and sub woofer, 2ch stereo), Press 2ch, Press ? / 1 to turn off the receiver, While holding down 2ch, press ? / 1
42
US
F:\Sony SEM
HA\Revision2_DDW700\J906XXXX_26614591212DDW700_US\2661459122\050AMP_HT-
DDW700_UCA.fm
masterpage: Left
HT-DDW700
2-661-459-12 (2)
Using only the front
speakers and sub woofer
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers and sub
woofer.
When multi channel surround formats are
input, the signals are downmixed to 2 channel
with bass frequencies being output from the
sub woofer.
When standard 2 channel stereo sources are
input, the receiver’s bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the sub
woofer.
Press 2CH.
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
2
While holding down 2CH, press
?/1.
“S.F. CLR.” appears on the display and all
sound fields are reset to their initial
setting.
1
2
3
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
TUNER AMP MENU
2CH
?/1
DIMMER
SLEEP
2CH
DISPLAY
INPUT MODE
INPUT SELECTOR
MASTER VOLUME
A.F.D.
MOVIE
AUTO CAL MIC
PHONES
MUSIC
1,2
2
010COV_HT-DDW700_UCA.book Page 42 Friday, January 13, 2006 3:36 PM