Sony PCG-GRX670K - Manual (Page 97)

Removing the port replicator
To remove the port replicator
1. Close any active programs to prevent data loss.
2. Double-click the Unplug or Eject Hardware icon on the taskbar. The Unplug or Eject Hardware window
appears.
3. Select the floppy disk drive in the Hardware devices window, if it is not already selected.
4. Click Stop. The Stop a Hardware device window appears.
5. Make sure the appropriate device is selected, and click OK. A message appears stating it is safe to remove the
hardware device.
6. Pull the release levers on each side of the port replicator to release the it from the computer.
Releasing the Port Replicator
7. Lift the computer away from the port replicator.
Rem ov ing the Port Replicator
Page 97