Sony STR-DH540 - Manual (Page 60)

60 GB
x Pass Through
Lets you output the HDMI signals to the
TV even when the receiver is in standby
mode.
• On*: When the receiver is in the standby
mode, the receiver continuously outputs
HDMI signals from the receiver’s HDMI
TV OUT jack.
• Auto: When the TV is turned on while
the receiver is in the standby mode, the
receiver outputs HDMI signals from the
receiver’s HDMI TV OUT jack. Sony
recommends this setting if you use a
“BRAVIA” Sync compatible Sony TV.
This setting saves power in the standby
mode when compared with the “On”
setting.
This setting can only work when “Control for
HDMI” is set to “On”.
• Off: The receiver does not output HDMI
signals when in standby mode. Turn on
the receiver to enjoy the connected
equipment’s source on the TV. This
setting saves power in the standby mode
when compared with the “On” setting.
* For USA, Canada and Australia models only.
When “Auto” is selected, it may take a little more
time for the image and sound to be output to the
TV than when “On” is selected.
x HDMI Audio Out
Lets you set the HDMI audio signals output
from the playback equipment connected to
the receiver via an HDMI connection.
• AMP: The HDMI audio signals from the
playback equipment are only output to
the speakers connected to the receiver.
Multi channel sound can be played back
as it is.
Audio signals are not output from the TV’s
speaker when “HDMI Audio Out” is set to
“AMP”.
• TV+AMP: The sound is output from
TV’s speaker and the speakers connected
to the receiver.
• The sound quality of the playback equipment
depends on the TV’s sound quality, such as
the number of channels, and the sampling
frequency, etc. If the TV has stereo speakers,
the sound output from the receiver is also in
stereo as that of the TV, even if you play back
multi channel source.
• When you connect the receiver to a video
equipment (projector, etc.), sound may not be
output from the receiver. In this case, select
“AMP”.
x Subwoofer Level
Lets you set the level of the subwoofer to
0 dB or +10 dB when PCM signals are
input via an HDMI connection. You can set
the level for each input to which an HDMI
input jack is assigned independently.
• Auto: Automatically sets the level to
0 dB or +10 dB, depending on the audio
stream.
• +10 dB
• 0 dB
x Fast View
Lets you set the operation of Fast View.
• Auto: You can select HDMI input faster
than the normal selection.
• Off: Fast View and PREVIEW (HDMI)
functions are not available.
Input Settings menu
You can adjust the settings for the
connections of the receiver and other
equipment.
x Input Mode
Lets you fix the audio input mode when
you connect equipment to both digital and
analog audio input jacks.
For details, see “Switching between digital
and analog audio (INPUT MODE)”
(page 51).
Note
Note
Note
Notes