Sony STR-DH540 - Manual (Page 66)

66 GB
To view the information on
the display panel
The display panel provides various
information of the receiver status such as
sound field.
1 Select the input for which you want to
check the information.
2 Press AMP, then press DISPLAY
repeatedly.
Each time you press DISPLAY, the
display will change cyclically as
follows.
Index name of the input
1) t Input you
selected t Sound field currently
applied
2) t Volume level t Stream
information
3)
When listening to FM and AM
radio
Preset station name
1)
t Frequency t
Sound field currently applied
2)
t
Volume level
When receiving RDS
broadcasts
(Europe and Australia models
only)
Program Service name or preset station
name
1)
t Frequency, band and preset
number t Sound field currently
applied
2)
t Volume level
1)
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only blank
spaces have been entered or it is same as the
input name.
2)
“PURE.DIRECT” appears when Pure Direct
function is activated.
3)
Stream information may not be displayed.
Character or marks may not be displayed for
some languages.
Reassigning the input
button
You can change the default settings of the
input buttons to suit the equipment in your
system. For example, if you connect a Blu-
ray Disc player to the SAT/CATV jack on
the receiver, you can set the SAT/CATV
button on this remote to control the Blu-ray
Disc player.
You cannot reassign the TV, TUNER and USB
input buttons.
1
While holding down the input
button of which you want to
change the assignment, hold down
TV ?/1.
Example: While holding down SAT/
CATV, hold down TV
? /1.
2
With the TV ?/1 button held,
release the input button.
Example: With the TV ? /1 button
held, release SAT/CATV.
Note
Using the Remote Control
Note
TV ?/1
Input
buttons
Numeric
buttons