Sony MHC-NX3AV - Manual (Page 46)

46
Specifications
European model
Front Speaker:
DIN power output (rated) 90 + 90 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
110 + 110 watts
(6 ohms at 1 kHz,
10% THD)
Music power output (reference)
180 + 180 watts
(6 ohms at 1 kHz,
10% THD)
Center Speaker:
DIN power output (rated) 25 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
35 watts
(8 ohms at 1 kHz,
10% THD)
Music power output (reference)
70 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
DIN power output (rated) 25 + 25 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)
Music power output (reference)
70 + 70 watts
(8 ohms at 1 kHz,
10% THD)
Other models
The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 95 + 95 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
120 + 120 watts
(6 ohms at 1 kHz,
10% THD)
Center Speaker:
DIN power output (rated) 25 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
35 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
DIN power output (rated) 25 + 25 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
Center Speaker:
Continuous RMS power output (reference)
35 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
Continuous RMS power output (reference)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)
Canadian model
Front Speaker:
Continuous RMS power output (reference)
130 + 130 watts
(6 ohms at 1 kHz,
10% THD)
Total harmonics distortion
Less than 0.07%
(6 ohms at 1 kHz, 60 W)
Center Speaker:
Continuous RMS power output (reference)
35 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
Continuous RMS power output (reference)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)