Performing initial setup operations, Multi channel surround setup – Sony STR-DE695 User Manual

Page 17

Advertising
background image

Hooking Up and Setting Up the Speaker System

17

US

STR-DE695 4-247-631-11 (1) US

Performing initial setup
operations

Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.

Tip

To check the audio output during settings (to set up
while outputting the sound), check the connection
(page 22).

Clearing the receiver’s
memory

Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.

1

Turn off the receiver.

2

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears in the
display alternatingly.

3

Press ENTER.

After “CLEARING” appears in the display
for a while, “CLEARED” appears.
The following are reset to their factory
settings.

• All settings in the SET UP, CUSTOM,

LEVEL and EQ menus.

• The sound field memorized for each

input selector and preset station.

• All sound field parameters.
• All preset stations.
• All index names for input selector and

preset stations.

• The master volume is set to

“VOL MIN”.

45

°

90

°

20

°

A

A

B

C

C

D

Performing initial setup
operations

Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 56. See pages
17–22 for speaker settings and page 39 for
other settings.

Multi channel surround
setup

For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).

However, the receiver lets you place the center
speaker up to 5 feet closer (B), the surround
speakers up to 15 feet closer (C) and the
surround back speaker up to 15 feet closer (D)
to the listening position.

The front speakers can be placed from 3 to 23
feet from the listening position (A).

You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.).

When placing surround speakers to your side

(long room)

continued

Advertising