Sony STR-DE695 - Manual (Page 53)

Additional Information
53
US
STR-DE695 4-247-631-11 (1) US
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (models of area code
U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
90 W + 90 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1) : 90 W/ch
CENTER 1) : 90 W
SURR 1) : 90 W/ch
SURR BACK 1) : 90 W
(8 ohms 1 kHz, THD 0.7 %)
FRONT
1) : 100 W/ch
CENTER 1) : 100 W
SURR 1) : 100 W/ch
SURR BACK 1) : 100 W
1) Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
MULTI CH IN,
CD/SACD, AUX,
MD/TAPE, DVD,
VIDEO 1, 2, 3
Inputs (Analog)
MULTI CH IN,
CD/SACD, AUX,
MD/TAPE, DVD,
VIDEO 1, 2, 3
2) INPUT SHORT (with sound field and equalizer
bypassed).
3) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
VIDEO 2, CD/SACD, Sensitivity: –
MD/TAPE (Optical) Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
MD/TAPE (OUT), Voltage: 500 mV
VIDEO 1 (AUDIO OUT) Impedance: 10 kilohms
SUB WOOFER Voltage: 2 V
Impedance: 1 kilohms
Outputs (Digital)
MD/TAPE (Optical) Sensitivity: –
EQ
Gain levels:
±10 dB, 0.5 dB step
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer
bypassed)
continued
Sensitivity: 500 mV
Impedance: 50 kilohms
S/N
2) : 96 dB
(A, 500 mV 3) )