Sony STR-DE695 - Manual (Page 24)

24
US
STR-DE695 4-247-631-11 (1) US
MUTING
Press MUTING on the remote to mute the
sound. Press again to cancel the muting
function. The muting function is also canceled
when you turn the power on or turn the
MASTER VOLUME to turn the volume up.
PHONES
Use to connect headphones.
• When the headphones are connected, speaker
output is automatically canceled and “SP A”
and “SP B” do not light up in the display.
• When the headphones are connected, selectable
sound fields are HP 2CH, HP MULTI or HP
THEA (page 28).
SPEAKERS (OFF/A/B/A+B)
Press SPEAKERS (OFF/A/B/A+B) to output
the sound from the speakers connected to the
SPEAKERS FRONT terminals.
Each time you press the button, the display will
light up cyclically as follows:
SP A t SP B t SP A and SP B t
No display*
To drive Select
Speaker System A SP A (default setting)
(Connected to the
SPEAKERS FRONT A
terminals)
Speaker System B SP B
(Connected to the
SPEAKERS FRONT B
terminals)
Both Speaker System A SP A and SP B
and B (Connected to the
SPEAKERS FRONT A
and B terminals)
* If you do not want to drive Speaker System A
and B, press SPEAKERS (OFF/A/B/A+B) until
“SP A” and “SP B” do not light up in the display
(no display).
Selecting the component (continued)
Changing the display
DIMMER
Press DIMMER repeatedly to adjust the
brightness of the display (3 steps).
DISPLAY
Each time you press DISPLAY, the display
changes cyclically as follows:
Index name of the component* t Selected
component t Sound field applied to the
program source
When the tuner is selected
Index name of the preset station* t
Frequency t Sound field applied to the band
or the preset station
* Index name appears only when you have assigned
one to the component or preset station (page 37).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input selector.