Sony HCD-GX40 - Manual (Page 8)

8 GB
Hooking up the system (continued) 4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
120V
*
220V 230 - 240V
* Middle Eastern models: 120 – 127 V
5 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
To connect optional components
See page 24.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Note
Keep the speaker cords away from the antennas to
prevent noise.
3 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Jack type A
FM75
AM
AM loop antenna
Extend the FM lead antenna
horizontally
AM loop antenna
Extend the FM lead antenna
horizontally
Jack type B
AM
FM75
COAXIAL