Sony RCD-W10 - Manual (Page 28)

28
Additional Information
Using the Setup Menu
You can make various settings on this unit by
using the Setup Menu.
When using the remote, set SELECT to CDR.
1
Press MENU/NO.
2
Turn AMS (or press . / > on the
remote) to select the setup item, and
press AMS (or YES).
3
Turn AMS (or press . / > on the
remote) to set the item, and press AMS
(or YES).
4
Press MENU/NO.
To initialize an item’s parameter
Press CLEAR after Step 2.
Notes
• The menus you can use while the unit is stopped,
playing, or recording differ.
• The setting is stored in memory even if you turn off
the unit or disconnect the power.
./>
SELECT
Setup item
Track Mark
LSync Lvl
Smart Space
Direct
Text Save
Post Gap
DECK A Lvl
Optical Lvl
Function (reference page)
Sets the Track Marking Function (page 22).
Changes the trigger level for Track Marking Function (page
22).
Sets the Smart Space and Auto Cut Functions (page 17).
Sets the Direct Recording Function (page 23).
Records the CD text automatically at Make-Disc Synchro-
Recording (page 18).
Sets the function to add Post Gap. (page 17).
Adjusts the input level from the CD player section (DECK A)
(page 21).
Adjusts the input level from the DIGITAL OPTICAL IN
connector (page 21).
Parameters (Initial setting)
LSync/Off (LSync)
–72 dB to –20 dB in 2 dB
increments (–50 dB)
On/Off (On)
On/Off (Off)
On/Off (On)
On/Off (Off)
–
∞
dB to 18.0 dB (0.0 dB)
–
∞
dB to 18.0 dB (0.0 dB)
Menu items
MENU/NO
MENU/NO
AMS
CLEAR
CLEAR
YES
YES