Sony DHC-MD515 - Manual (Page 40)

40
5
Press ENTER/YES.
“SYNC” starts flashing, then remains lit
in the display. The MD deck stands by
for recording and the CD player pauses.
If you use an MD with tracks already
recorded on it, the MD deck
automatically locates the end of the
recording and starts the new recording
from there.
6
Make sure that “SYNC” stops
flashing, then press (P.
CD starts playing and MD starts
recording. Both the CD player and MD
deck stop automatically when the
recording is completed.
Recording from four or
more CDs
Repeat steps 1 and 4 through 6.
To cancel recording
Press EDIT/NO in step 4.
To stop recording
Press p.
When recording is finished
Remove the MD. “TOC Write” flashes and
the recorded contents are memorized on the
MD.
While “TOC Write” is flashing
Do not move the unit or pull out the AC
power cord to ensure complete recording.
The deck updates the Table of Contents
(TOC) while “TOC” is flashing.
Note
You can record only on the MD inserted in the MD 1
slot.
1
Insert a CD.
2
Insert a recordable MD (see page
18).
You can record on any MDs inserted in
MD 1 – 3 slots.
3
Press the CD button to switch the
function to CD, then press
MD/CD 1 – 3.
CD starts playing.
4
Press REC IT when you find the
desired track.
The CD goes back to the beginning of the
track, and recording starts. The MD
deck stops automatically when the
current track is finished.
To stop recording
Press p.
When recording is finished
Remove the MD. “TOC Write” flashes and
the recorded contents are memorized on the
MD.
While “TOC Write” is flashing
Do not move the unit or pull out the AC
power cord to ensure complete recording.
The deck updates the Table of Contents
(TOC) while “TOC” is flashing.
Recording the
current CD track
— Rec It
You can select the CD track you want to
record while listening, then start recording
immediately.
4
3
p
Recording only the first track on
each CD (continued)
1 2 3
1
SYNC
LEVEL SYNC PROGRAM 3
CD1-1 0.00
TAPE