Sony DCR-VX1000 - Manual (Page 14)

14
The editsearch function is used to view the recorded picture for a moment during recording.
Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the
viewfinder.
(1) While pressing the centre button on the POWER switch, turn it to CAMERA.
(2) Turn STANDBY up.
(3) Press the – (Œ) side of EDITSEARCH momentarily; the last few seconds of the recorded portion
plays back (Rec Review). You can also monitor the sound by using headphones (not supplied).
Hold down the – side of EDITSEARCH until the camcorder goes back to the scene you want. The last
recorded portion is played back. To go forward, hold down the + side (Editsearch).
Checking the Recorded Picture
EDITSEARCH
EDITSEARCH
EDITSEARCH
CAM
ER
A
V TR
POWER
OFF
LOCK
STANDBY
PHOTO STANDBY
1 2
3
To begin rerecording
Press START/STOP. Provided you do not eject the cassette, the transition between the last scene you
recorded and the next scene you record will be smooth.
Note on editsearch function
You can view the recorded picture in the playback pause mode using the editsearch function even when the
POWER switch is turned to VIDEO.