Sony DCR-VX1000 - Manual (Page 15)

15
Basic Operations
You can use this camcorder as a VCR by connecting it to your TV for playback. It is recommended to
use the house current as the power source (p. 18).
Connecting Directly to a TV
Connect the camcorder to your TV by using the supplied A/V connecting cable. Set the TV/VCR
selector to VCR on the TV.
To get higher quality pictures in DV format, connect the camcorder to your TV using the S video cable.
If you are going to connect the camcorder using the S video cable [a], you do not need to connect the
yellow (video) plug of the A/V connecting cable [b].
Connections for Playback
: Signal flow
AUDIO IN AUDIO OUT
S VIDEO OUT [a] S VIDEO IN
TV
VIDEO OUT [b] VIDEO IN
If a VCR is connected to the TV
Connect the camcorder to LINE IN on the VCR by using the supplied connecting cable. Set the input
selector on the VCR to LINE. Set the TV/VCR selector to VCR on the TV.
: Signal flow
TV
VCR
VIDEO/AUDIO IN
S VIDEO IN
AUDIO OUT
VIDEO
OUT [b]
S VIDEO OUT [a]
If your TV or VCR is monaural
Connect only the white plug for audio on the TV or the VCR. With this connection, the sound is
monaural, and the sound from the headphone jack on the camcorder is also monaural.
To connect a TV or a VCR without audio/video input jacks
Use an RFU adaptor (not supplied).