Sony DCR-VX1000 - Manual (Page 53)

53
Advanced Operations
Checking the Information for the Recorded
Picture
You can display the recorded date and time or the various settings in the viewfinder while playing
back the tape.
Press DATA CODE on the Remote Commander while playing back. Each time you press the button,
the indicator changes: recorded date and time
→
various settings
→
No indication, cyclically in the
viewfinder.
Press DATA CODE again to erase the display.
DATA CODE
“– –:– –:– –” appears when
•
the camcorder cannot read the data code because of a damaged tape or noise.
•
the tape was recorded without setting the date and time.