Sony PCG-C1VP - Manual (Page 22)

VAIO
®
Notebook Quick Start
22
Connecting an i.LINK
®*
device
The VAIO C1 PictureBook includes an i.LINK S400 (IEEE1394) connector,
which you can use to connect to an i.LINK enabled digital camcorder.
To connect a digital camcorder
❑ Plug one end of an i.LINK cable into the S400 connector on the left side
of the computer and the other end into the DV In/Out connector on the
digital camcorder.
✍
When you connect two VAIO computers, you must assign each computer a unique
name. The computers can be identified by this unique name when the two computers
are networked together.
✍
If you have previously purchased a VAIO computer or notebook that does not have the
Windows Me operating system or Smart Connect 3.0 software preinstalled, consult
the Sony website for support options (http://www.sony.com/pcsupport).
* i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394
connection. The i.LINK connection may vary, depending on the software applications, oper-
ating system and i.LINK compatible devices. All products with an i.LINK connection may
not communicate with each other.
Please refer to the documentation that came with your i.LINK compatible device for informa-
tion on operating conditions and proper connection. Before connecting i.LINK compatible
PC peripherals to your system, such as a CD-RW or hard disk drive, confirm their operating
system compatibility and required operating conditions.