Sony PCG-C1VP - Manual (Page 59)

Power Management Commands
PowerPanel also provides power management commands that you can use to
activate specific power management functions and to control power for a specific
device. You can use these commands to override a profile setting or initiate an
immediate action.
Conserving Battery Power
When using the notebook with a battery, the LCD display and the hard drive can
be set to switch off automatically to conserve battery power.
Spreadsheet
Optimizes performance and power requirements for spreadsheet applications.
Communications
Extends battery life by initiating a quick display timeout. The Internal modem
remains powered. You can also establish settings for LCD (Video) Standby,
Hard Disk Standby, and Standby to optimize power management for your
system.
Automatic Profile Selection
Automatically switches to a profile suitable for active applications.
Icon Description
Standby
Puts the system into Standby mode, a power management state that saves the
state of the system and peripheral devices in memory (RAM). Power
consumption reduces to a minimum, and the system remains on. To return the
system to the active state, press any key or the power button on your computer.
Hibernate
Provides for the lowest level of power consumption. The system writes the
state of the system and peripheral devices to the hard disk and turns off the
system power. To return the system to the original state, use the power button
to turn on power. The system saves the data in the Save to Disk Partition on the
hard drive.
LCD (Video) Standby
Turns off the video display to save power. If you turn off the Video Standby
timer, the display remains active except when the system enters Standby mode.
The video display system is one of the largest consumers of power in the
system.
Icon Description