Safety guidelines, Caution – Actron Digital Multimeter CP7676 User Manual

Page 2

Advertising
background image

SAFETY GUIDELINES

TO PREVENT ACCIDENTS THAT COULD RESULT IN SERIOUS

INJURY AND/OR DAMAGE TO YOUR VEHICLE OR TEST EQUIPMENT,

CAREFULLY FOLLOW THESE SAFETY RULES AND TEST PROCEDURES

2

• Always wear approved eye protection.

• Always operate the vehicle in a well ventilated area. Do not inhale exhaust gases – they are very

poisonous!

• Always keep yourself, tools and test equipment away from all moving or hot engine parts.

• Always make sure the vehicle is in park (Automatic transmission) or neutral (manual

transmission) and that the parking brake is firmly set. Block the drive wheels.

• Never lay tools on vehicle battery. You may short the terminals together causing harm to yourself,

the tools or the battery.

• Never smoke or have open flames near vehicle. Vapors from gasoline and charging battery are

highly flammable and explosive.

• Never leave vehicle unattended while running tests.

• Always keep a fire extinguisher suitable for gasoline/electrical/chemical fires handy.

• Always use extreme caution when working around the ignition coil, distributor cap, ignition wires,

and spark plugs. These components contain High Voltage when the engine is running.

• Always turn ignition key OFF when connecting or disconnecting electrical components, unless

otherwise instructed.

• Always follow vehicle manufacturer’s warnings, cautions and service procedures.

CAUTION:

Some vehicles are equipped with safety air bags. You must follow vehicle service manual cautions

when working around the air bag components or wiring. If the cautions are not followed, the air bag

may open up unexpectedly, resulting in personal injury. Note that the air bag can still open up

several minutes after the ignition key is off (or even if the vehicle battery is disconnected) because

of a special energy reserve module.

All information, illustrations and specifications contained in this manual are based on the latest information

available from industry sources at the time of publication. No warranty (expressed or implied) can be made

for its accuracy or completeness, nor is any responsibility assumed by Actron Manufacturing Co. or anyone

connected with it for loss or damages suffered through reliance on any information contained in this manual

or misuse of accompanying product. A

ctron Manufacturing Co. reserves the right to make changes at any time to this manual or accompanying

product without obligation to notify any person or organization of such changes.

Advertising
This manual is related to the following products: