Vaio mx computer getting started guide – Sony PCV-MXS10 User Manual
Page 24
VAIO MX Computer Getting Started Guide
24
Option 2
1
Connect one end of the coaxial cable (supplied) to your cable service access.
Connect the other end to the single-connection end of a splitter adapter.
2
Connect a second coaxial cable (optional) to the double-connection end of
the splitter adapter. Connect the other end to the VHF/UHF jack on the back
panel of your computer.
3
Connect a third coaxial cable (optional) to the double-connection end of the
splitter adapter. Connect the other end to the VHF/UHF jack on the rear of
your TV monitor or display.
To Connect to a standard antenna (air)
You can connect your Giga Pocket system to an indoor or outdoor antenna
system, using Option 1 or 2 from the previous section, “Connecting to standard
cable access (CATV).” Depending on the type of antenna system in your home,
your connection may require a VHF/UHF RF combiner/transformer (optional) to
connect your computer and the indoor/outdoor antenna system.
To connect in CATV mode (Option 2)
Cable service access
(wall outlet)
Coaxial cable
(supplied)
Splitter
(optional)
Coaxial cable
(optional)
VHF/UHF jack
Coaxial cable
(optional)
LINE
IN
LINE
OUT
DVI
R
L
SPEAKER
VHF/UHF
------ VIDEO 1 INPUT ------
S VIDEO/VIDEO
AUDIO