Sony CDP-M400CS - Manual (Page 11)

Playing CDs Playing CDs
11 US
(continued)
Using the Display
You can check stored disc information, such as the Disc
Names (see page 21) or Artist Names (see page 25), by
using the display.
Unlike a normal CD, a CD TEXT disc includes
information such as the disc title or artist name. The
display shows the CD TEXT information so that you
can check the current disc title, artist name, and track
title. When the player detects a CD TEXT disc, “CD
TEXT” appears in the display.
Display information of the normal discs
Display information in stop mode
The display shows the current disc number, total
number of tracks, and total playing time of the disc.
Total playing time
Current disc number or Disc Name etc.
Total number of tracks
Current disc number
1
CD2
GROUP
NO DELAY TEXT CD MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEAT SHUFFLE 1
SEC STEP MIN ART. GROUP TRACK HIT ART. NEXT 2nd
ALL S DISC
DISC
* D I S C - 2 * * 0 * * *
CD1
NEXT DISC
2nd PLAYER
DISC
DISPLAY TIME
To
Go to a specific track
directly Z
Go to a point in a
track while monitoring
the sound Z
Go to a point in a track
by observing
the display Z
Go to the next track
(MP3 file*)
Go back to the
preceding track
(MP3 file*)
Stop playing and
remove the disc
* When “ALL DISCS” or “1 DISC” is selected, you can locate
all the MP3 files in the selected disc. When “ALBUM” is
selected, you can locate all the MP3 files in the selected
ALBUM.
z When the TOC reading is completed
When MP3 files on the disc are played back, ”MP3”
appears in the display.
z When you turn off the player
The player remembers the last playing disc and the play
mode: Continuous (on page 10), Shuffle (on page 15), or
Program (on page 17). When you turn on the player
again, the player plays the same disc in the same play
mode.
Note
If “ ” appears in the large display, the disc has reached the
end while you were pressing M. Turn the l AMS L
dial counterclockwise or press m to go back.
Do this
Press the number button of the track
on the remote. When you directly
locate a track numbered over 10,
press >10 first, then the
corresponding number buttons.
Examples:
•To select track number 30 on a CD
recorded with 50 tracks, press >10,
then 3 and 10/0.
•To select track number 30 on a CD
recorded with 200 tracks, press
>10, then 10/0, 3 and 10/0.
Press m (backward)/M
(forward) on the remote and hold
down until you find the point.
Press m (backward)/M
(forward) on the remote and hold
down until you find the point
during pause. You will not hear the
sound during the operation.
Turn the l AMS L dial
clockwise by one click.
Turn the l AMS L dial
counterclockwise by one click.
Press OPEN/CLOSE.