Sony HCD-C450 - Manual (Page 29)

Getting Star
ted
29 GB
x LEVEL
You can vary the level of each speaker as follows. The default setting are underlined.
• C. LEVEL 0 dB (center speaker level)
Adjust the level of the center speaker (You can adjust from –6 dB to +6 dB in 1 dB steps).
• R. LEVEL 0 dB (rear speakers level)
Adjust the level of the rear speakers (You can adjust from –6 dB to +6 dB in 1 dB steps).
• S. W. LEV. 0 dB (subwoofer level)
Adjust the level of the subwoofer (You can adjust from –6 dB to +6 dB in 1 dB steps).
Notes
• When you select an item, the sound cuts off for a moment.
• Depending on the settings of other speakers, the subwoofer may output excessive sound.
To adjust the volume of all the speakers at once
Use the VOLUME control on the system.
Other AMP MENU settings
You can control the brightness of the front panel display, clear the preset stations and the station
names, and set the speaker parameters back to the default setting. Press AMP MENU repeatedly
to display 9 CUSTOMIZE. Use
X/x to select the following items.
x DIMMER
You can change the brightness of the front panel display by two ways. Use C/c to adjust the
settings.
x MEMO. CLR.
• N (No): Skip back to previous menu.
• Y (Yes): If you select Y by pressing ENTER, “Really? N” and “Really? Y” appear.
If you select “Really? Y” by pressing ENTER, “ALL CLEAR!” is displayed and all settings
such as preset stations and station names will be cleared, and speaker parameters will be reset
to their default settings.
continued